Sempra Energy said that Cameron LNG started feeding pipeline gas to the first liquefaction train of the LNG export project as it prepares to start production at the facility in Hackberry, Louisiana.This is the final commissioning step for Train 1 of Cameron LNG Phase 1, Sempra said in a statement.Lisa Glatch, chief operating officer of Sempra LNG and board chair for Cameron LNG, said, “Sempra Energy is now one step closer to reaching our goal of building up to 45 million tonnes per annum (Mtpa) of LNG export capacity to serve global markets.”Following authorization received from the Federal Energy Regulatory Commission Friday, April 5, allowing the introduction of pipeline feed gas, Cameron LNG will begin ramping up the feed gas deliveries to the facility as it completes the commissioning process.Phase 1 of the Cameron LNG liquefaction-export project, which includes the first three liquefaction trains, is a $10 billion facility with a projected export of 12 mtpa of LNG, or approximately 1.7 billion cubic feet per day.Cameron LNG Phase 1 is jointly owned by affiliates of Sempra LNG, Total, Mitsui & Co., and Japan LNG Investment, a company jointly owned by Mitsubishi Corporation and Nippon Yusen Kabushiki Kaisha (NYK). Sempra Energy indirectly owns 50.2 percent of Cameron LNG.Cameron LNG Phase 1 is one of five LNG export projects Sempra Energy is developing in North America.Cameron LNG Phase 2, previously authorized by FERC, encompasses up to two additional liquefaction trains and up to two additional LNG storage tanks.Sempra is also developing Port Arthur LNG project in Texas and Energía Costa Azul (ECA) LNG Phase 1 and Phase 2 in Mexico.
Located some 23 kilometres off the coast of Zeeland in the Netherlands, the 752 MW Borssele 1 + 2 wind farm will feature 94 Siemens Gamesa 8 MW wind turbines installed on monopile foundations. DEME Offshore’s jack-up Innovation is currently installing the foundations at the site, while Van Oord is installing the inter-array cables. Source: Port Esbjerg DEME Group’s installation vessel Sea Challenger has started loading the first wind turbine components for the Borssele 1 + 2 offshore wind farm at the Port of Esbjerg in Denmark. The wind farm will be connected to the Borssele Alpha offshore converter platform. Owned and developed by Ørsted, the wind farm is scheduled to be completed by the end of the year.